Nanjing Powder New Material Co., Ltd

正文文字3

admin@powder-coating.com.cn

Home >> Products >>Texture Powder Coating >> Antique Silver Powder Coating
Product Detail

Antique Silver Powder Coating

No price
Collect
  • 商品说明

DESCRIPTON

Antique silver powder coating can cause some difficulty for painters. The fact is that the same powder may have different shades on the surface. This is due to the fact that the composition of the paint contains a two-component pigment whose materials do not dissolve into each other. Therefore, it is important to comply with a number of conditions under which the paint will have a constant uniform shade.

 

First, we emphasize that before painting it is necessary to properly prepare the surface. Without it, any powder paint, not just Antique, will go bad. If there are defects on the surface, such as cracks or scratches, it is necessary to drill it. Secondly, for qualitative application of this type of paint it is necessary to observe also specific conditions:

image.png


The heating mode in the polymerization furnace must always be identical. The faster the heating occurs, the smaller the coating structure becomes. The corona electrode should have approximately the same voltage. The color of the coating depends on the orientation of the metal particles. And it depends on the voltage. The best voltage for such a powder is 20-25 kV. The coating layer should be at least 80-100 microns. This will make the structure better visible. The ratio of fresh powder to that of the recovery system must be at least 3:1. By following our tips, you will be able to get the perfect Antique structure on your surface.

 

ADVANTAGES

●More Durable

●More Environmental Friendly

●Powder helps reduce the health hazard to operators

●With powder, processing time is reduced

●With powder, the air requirements are reduced – more cost savings

●Powder is cleaner to use

 

SPECIFICATION

 

Product details

Product Name

Antique silver powder coating

blueMaterial

epoxy polyester

Color

silver

Gloss level

50-90°

Particle Size

Average 32-42μm

Specific Gravity

1.2-1.7g per cubic meter

Coverage

8-10 square meters per Kg at 60-90 μm film thickness

film thickness

Not less than 100μm

Powder coated Film Mechanical Properties

Adhesion

Cross-cut(2mm),no loss of adhesion

Impact Resistance

Direct impact 50kg/cm

Pencil Hardness

1H-2H

Cupping Test

6mm Mandrel

Bending Test

5mm

Powder Coated Film Chemical Resistance

Salt Spray Test

5% NaCl Solution for 500 hours - No change

Acid Resistance

5% NaCl Solution for 500 hours - No change

Alkali Resistance

3% NaOH for 240 hours dip test - No change

Storage Stability

Store in ventilated, dry, clean room, temperature < 25℃

Relative humidity 50-65%

Away from direct sunlight, fire, heat

Away from direct sunlight, fire, heat

 

ANTIQUE SILVER POWDER COATING COLOR SAMPLES

image.png


Hot Tags: antique silver powder coating, China, manufacturers, suppliers, factory, customized, wholesale, buy, in stock, made in China, Wrinkle Finish Powder Coatingpowder coating stainless steelpowder coated metalcopper vein powder coatAntique Gold Powder Coatingblack chrome powder coat


分享至

WELCOME TO SEND US INQUIRY

Here at Nanjing Powder New Material Co.,Ltd., we cater to your needs. We are 100% dedicated to delivering a satisfactory outcome and will always provide a quality

at a fair price. We thank you for

your browsing and look forward

to working with you in near future.




QR Code

×
seo seo